OptiSigns Pre-Configure Raspberry Pi Device - Getting Started Guide

You've just received your OptiSigns Pre-Configure Raspberry Pi Device? Here's a quickstart guide to get it set up.

1) Connect cables & power:

Please use the cables and adapter that come with the box to minimize issues

After connecting all cables and plug-in power, the device will take a moment for the first boot.

If you entered your WiFi information when you ordered your device, you can skip to step 3 and start assigning content.

2) (Optional) Connect to your network:

If you have entered WiFi info when ordering the device, you can skip this step)

If you see the message: "Internet connection required for the first time" you will need to connect the device to your network.

To configure your WiFi now, you can follow this guide. You may need to restart the device for the WiFi config to update.

To use a LAN Ethernet connection, you can plug in your Ethernet cable here:


If you order an un-provisioned device (the device will not be automatically provisioned to your account because you ordered as a guest, or you just chose to order an un-provisioned device).
The device will generate a Pairing code, like below, and you can log in to https://app.optisigns.com and click Add Screen to Pair the device. For more details refer to this article.

3) Assign content to your device:

Your pre-configured device will be in the "Ordered Devices" folder of your screens management page.


To assign content Click Edit

Click the Type drop-down list and select Playlist & Select the Playlist you want to use. If you haven't created a playlist yet, you can use the Simple Playlist that was automatically created with your account.

Click Save


That's all! Congratulations, you have set up your Pre-configured Raspberry Pi Device.

If you have questions please don't hesitate to contact us at support@optisigns.com